Search results for "B. Mechanical propertie"
showing 10 items of 11 documents
Green composites: A brief review
2011
The rising concern towards environmental issues and, on the other hand, the need for more versatile polymer-based materials has led to increasing interest about polymer composites filled with natural-organic fillers, i.e. fillers coming from renewable sources and biodegradable. The composites, usually referred to as "green", can find several industrial applications. On the other hand, some problems exist, such as worse processability and reduction of the ductility. The use of adhesion promoters, additives or chemical modification of the filler can help in overcoming many of these limitations. These composites can be further environment-friendly when the polymer matrix is biodegradable and c…
Green composites based on biodegradable polymers and anchovy (Engraulis Encrasicolus) waste suitable for 3D printing applications
2022
Every day large amounts of fish waste are produced and grossly discarded in markets around the world causing environmental and hygiene issue. The use of these scraps for the production of materials with higher added value can definitely contributed to solve this problem. In this work, 10% and 20% of anchovy fishbone powder (EE), obtained by market waste, were microbiological and mechanical tested and subsequently added to polylactic acid (PLA) and to a commercial blend of biodegradable co-polyesters (Mater-Bi®). Rheological characterization suggests the potential printability of all prepared composites filaments. 10% EE filled composites showed outstanding printability. Morphological analys…
Effect of filler on the creep characteristics of epoxy and epoxy-based CFRPs containing multi-walled carbon nanotubes
2014
The aim of this work was to determine the effect of carbon nanotubes (CNTs) on the elastic and viscoelastic properties of an epoxy resin used in carbon fiber-reinforced plastics (CFRPs) in the matrix-dominated flexural testing mode. Neat and CNTs-containing (1. wt.%) epoxy resin and CFRP specimens were prepared and investigated. Three-point bending tests were carried out on nanocomposite (NC) and CFRP specimens at room temperature in quasi-static and cyclic creep regimes. The main effect of CNTs was observed in the reduction of creep compliance of epoxy (40%) and CFRP (30%), especially at higher stresses. The reduction of creep characteristics especially on viscoelastic and plastic strains …
Processing and characterization of highly oriented fibres of biodegradable nanocomposites
2015
Abstract Biodegradable polymeric materials are becoming day by day ever more important in packaging, agriculture, single-use cutleries and other large consumer applications. The major part of those materials is used under the form of film, i.e. subjected to elongational flow, but the main problem is that they often offer poor mechanical properties. Adding nanofillers, like Multi Walled Carbon Nanotubes (MWCNTs) may solve this problem but only if there is a full control of their orientation inside the material. Aim of this work is to investigate the processing-properties-morphology relationships for a system prepared under elongation flow of MaterBi and commercial MWCNTs. The materials were …
Mechanical testing and numerical modelling of pull-wound carbon-epoxy spinnaker poles
2002
The paper deals with experimental testing and numerical simulation of the mechanical behaviour of multi-layer cylindrical coupons, of two different diameters, made in carbon-epoxy composite. The aim of the study is to provide a simple and effective numerical model that can be used as a design tool for structural elements having analogous geometrical and manufacturing characteristics. The numerical analysis, performed in the elastic regime with a standard finite element (FE) code, was strongly correlated with the laboratory determination of fibre-volume fractions and of some elastic parameters of the material system. Other parameters, like the shear modulus values G, were in fact appropriate…
Properties-morphology relationships in electrospun mats based on polylactic acid and graphene nanoplatelets
2018
Abstract Aligned and randomly oriented polylactic acid (PLA) biocomposite nanofiber mats filled with Graphene nanoplatelets (GnP) were prepared by electrospinning. The morphological analysis revealed the successful alignment of the fibers achieved by collecting the mats on a high-speed rotary drum. Furthermore, GnP addition on the polymeric solution leads to an increase of the viscosity with a consequent increment of the fiber diameter. Tensile tests demonstrated that the reinforcing effect of GnP when added to the PLA matrix was more than three times higher in the aligned systems if compared with the respective randomly oriented mats. DSC analysis showed that GnPs were able to slightly inc…
A comparative study of fatigue behaviour of flax/epoxy and glass/epoxy composites
2012
Experimental investigations on flax and glass fabrics reinforced epoxy specimens, i.e. FFRE and GFRE, submitted to fatigue tests are presented in this paper. Samples having [0/90]3S and [±45]3S stacking sequences, with similar fibre volume fractions have been tested under tension–tension fatigue loading. The specific stress-number of cycles to failure (S–N) curves, show that for the [0/90]3S specimens, FFRE have lower fatigue endurance than GFRE, but the [±45]3S FFRE specimens offer better specific fatigue endurance than similar GFRE, in the studied life range (<2 × 10^6). Overall, the three-stage stiffness degradation is observed in all cases except for [0/90]3S FFRE specimens, which prese…
CuO nanoparticle filled vinyl-ester resin nanocomposites: Fabrication, characterization and property analysis
2007
Abstract Both unmodified cupric oxide (CuO) nanoparticles and those functionalized with a bi-functional coupling agent methacryloxypropyl-trimethoxysilane (MPS) were used to fabricate vinyl-ester resin polymeric nanocomposites. The nanoparticle functionalization was observed to have a significant effect on the physical properties of the cupric oxide filled vinyl-ester resin nanocomposite. Thermal degradation study by thermo-gravimetric analysis (TGA) showed the increased thermo-stability in the functionalized-nanoparticle-filled vinyl-ester resin nanocomposites as compared with the unmodified-nanoparticle-filled counterparts. The more uniform particle dispersion and the chemical bond betwee…
Multi-functional hindered amine light stabilizers-functionalized carbon nanotubes for advanced ultra-high molecular weight Polyethylene-based nanocom…
2015
Hindered Amine Light Stabilizer (HAS) molecules have been covalently linked on the outer surface of multi-walled carbon nanotubes (CNTs), and the so-obtained multi-functional fillers (HAS-f-CNTs) have been compounded with Ultra High Molecular Weight Polyethylene (UHMWPE) to get composite films. The success of the grafting reaction of the HAS molecules has been confirmed through spectroscopic and thermo-gravimetric analyses. Morphological analyses reveal a segregated microstructure, in which CNT-rich channels surround the polymer domains. This morphology results in improved mechanical properties and appreciable electrical conductive features. More importantly, the addition of only 1 wt.% of …
A new eco-friendly chemical treatment of natural fibres: Effect of sodium bicarbonate on properties of sisal fibre and its epoxy composites
2016
Abstract Several researchers have shown how sisal fibres possess remarkable tensile properties that yield them good candidates as reinforcement in biocomposite materials. This work aims to evaluate the effect of an eco-friendly and cost effective surface treatment method based on the use of commercial sodium bicarbonate (i.e. baking soda) on properties of sisal fibre and its epoxy composites. In particular, raw sisal fibres were treated with a 10%w/w of sodium bicarbonate solution for different periods (24, 120 and 240 h), at room temperature. Changes occurring in sisal fibres were characterized through scanning electron microscope, Fourier transform infrared spectroscopy, thermogravimetric…